N60 W15088 Bobolink Ave. --  Menomonee Falls, WI 53051 -- (262) 252-3804 - Email Badger Metal Tech - click above logos

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

 

      Surface Comparisons using Combinations of

and


The above photo of a die casting die shows sections that were processed with different combinations of our MetaLLifeÒ and ThermaLLifeÒ processes.  The letters indicate areas that can be viewed in a close up view. Click on any letter to see the corresponding view.

Click here...to see crack closure results.

The enlarged photos show how the 46Rc die's physical appearance is affected with various combinations.  The chart below provides reasons why you might choose a particular combination.

Process Combination

Reason and Justification to Apply
MetaLLifeÒ then ThermaLLifeÒ - New Die Durability of topography benefits - Cavitation/Lamination
MetaLLifeÒ then ThermaLLifeÒ then MetaLLifeÒ again Proactive die maintenance program - Guarantee
ThermaLLifeÒ then MetaLLifeÒ - New Die Maximum protection and cosmetic requirement

All applications could be polished or buffed to a chrome application finish.
No additional time or procedure change in polishing or buffing was necessary.
 

Some web pages were last modified 08/21/2010
Home  |  About Us  |  Services  |  Gallery |  Glossary  |  Contact Us

Copyright © 1996-2010 Badger Metal Tech, Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
 MetaLLifeÒ and ThermaLLifeÒ and TooLLife™ are registered or in process with the US patent and trademark office.  Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.